Our non-electronic air heaters can be steplessly controlled externally using the DSE three-phase controller. The air temperature can also be precisely controlled using the KSR DIGITAL temperature controller.
Three-phase adjustment unit DSE
Three-phase controller. External stepless adjustment of non-electronic air heaters.
Technical Data
DSE for Potentiometer – 3 × 400 V / 3 x 20 A
| Attribute | Unit | Value |
|---|---|---|
| Voltage | V~ | 3 × 400 |
| Size (L × B × H) | mm | 230 × 165 × 86 |
| Conformity mark |  |
|
| Protection class II |  |
DSE for KSR – 3 × 230 V / 3 x 20 A
| Attribute | Unit | Value |
|---|---|---|
| Voltage | V~ | 3 × 230 |
| Size (L × B × H) | mm | 230 × 165 × 86 |
| Conformity mark | |
|
| Protection class II | |
DSE for KSR – 3 × 400 V / 3 x 20 A
| Attribute | Unit | Value |
|---|---|---|
| Voltage | V~ | 3 × 400 |
| Size (L × B × H) | mm | 230 × 165 × 86 |
| Conformity mark | |
|
| Protection class II | |
DSE for KSR – 3 × 480 V / 3 x 20 A
| Attribute | Unit | Value |
|---|---|---|
| Voltage | V~ | 3 × 480 |
| Size (L × B × H) | mm | 230 × 165 × 86 |
| Conformity mark | |
|
| Protection class II | |
Downloads
General Catalogs :
GC – General Catalog Process Heat (7,95 MB)
Brochures :
BR – Process Heat – useful formulas (0,05 MB)
สินค้าที่เกี่ยวข้อง
Only 67 mm wide. Remote control interface for Leister CSS or SPS temperature controller.
Only 67 mm wide. Detection of heating element and device overheating with alarm output.
High performance. Detection of heating element and device overheating with alarm output.
High temperature air heater up to 900°C / 1,652°F. Minimal air volume 800 Nl/min.
Energy savings effect thanks to hot air recirculation. Maximum air inlet temperature 350 °C / 662°F.