|
|
[Accessories]
Accessories For Plastic Welding |
 |
|
|
-
Wide slot nozzles
- 105.492 straight jaw 120° bent at right angle
- 105.503 20 mm, 60° angled, side-inverted
- 105.547 (ø 21.8 mm) 50 x 8 mm, angled
- 105.548 (ø 21.8 mm) 40 x 5 mm, angled
- 105.556 20 mm, 90° angled
- 105.977 (ø 62.5 mm) 200 x 9 mm
- 105.982 (ø 37 mm) 150 x 4 mm
- 105.991 (ø 62.5 mm) 500 x 4 mm
- 105.992 (ø 62.5 mm) 400 x 4 mm
- 106.998 (ø 37 mm) 20 mm
- 106.999 (ø 37 mm) 40 mm
- 107.123 (ø 32mm) 20mm, angled
- 107.124 (ø 32 mm) 20 mm, 90°
- 107.125 (ø 32 mm) 20 mm, 60°
- 107.129 (ø 32 mm) 60 mm for Bitumen
- 107.130 (ø 32 mm) 40 mm, 60° bent
- 107.131 (ø 32 mm) 80 mm
- 107.132 (ø 32 mm) 40 mm
- 107.133 (ø 32 mm) 40 mm, perforated
- 107.141 (ø 21.8 mm) 15 mm
- 107.142 (ø 21.8 mm) 20 mm
- 107.258 (ø 50.5 mm) 70 x 10 mm
- 107.259 (ø 62.5 mm) 150 x 12 mm
- 107.260 (ø 62.5 mm) 85 x 15 mm
- 107.261 (ø 37 mm) 70 x 4 mm
- 107.262 (ø 62.5 mm) 300 x 4 mm
- 107.263 (ø 62.5 mm) 250 x 12 mm
- 107.270 (ø 50.5 mm) 150 x 12 mm
- 107.653 (ø 50.5 mm) 75 x 2 mm
- 108.078 (ø 37 mm) 100 x 4 mm
- 119.270 50 mm (2.0 inch) wide slot nozzle
- 119.315 20 mm (0.8 inch) wide slot nozzle
- 128.535 (ø 31.5 mm) 30 x 2 mm, 45° angled
-
-
-
-
-
Combi-wedge long, complete
-
-
-
-
-
-
-
Overlap welding nozzles, outside, push-fit
-
Overlap welding nozzles, inside, push-fit
-
-
Drawing nozzles
- 106.986 7 mm, without tacking tip
- 106.987 Triangular drawing nozzle 7 x 5.5 mm
- 113.399 round with tacking tip, ø 4 mm
- 113.666 round with tacking tip, ø 3 mm
- 113.670 Drawing nozzle triangular shaped with tacking tip, 90-5.7 mm
- 113.874 roung, without tacking tip, ø 4 mm
- 113.876 round, without tacking tip, ø 3 mm
- 113.877 triangular shaped, without tacking tip, 90-5.7mm
- 126.552 ø 4mm for Fluorplastic
|
|
|
|
GC - General Catalog Plastic Welding